The FarmTRX Head Height Sensor Kit provides real-time combine header height to your FarmTRX Yield Monitor, improving in-field area calculation and delivering live cut-height feedback. It retrofits to any combine and uses dual Inertial Measurement Units (IMUs) to accurately determine sensor orientation relative to the ground.
Important: This kit connects directly to the Yield Monitor Pro and Lite. If you have a Yield Monitor Plus+, Base, or 2.0, you will also need the AG-HS-1002 ECU Y-Split Harness, sold separately.
Key Features
- Provides real-time combine header height to the Yield Monitor
- Improves in-field area calculation and gives live cut-height feedback
- Retrofit installation to any combine
- Connects directly to Yield Monitor Pro and Lite
- Works with Yield Monitor Plus+, Base, and 2.0 when paired with the AG-HS-1002 ECU Y-Split Harness (sold separately)
- Dual Inertial Measurement Units (IMUs) install on the combine frame and feederhouse to determine sensor orientation to ground
Compatibility
This sensor kit is designed to retrofit to any combine. What you need depends on your FarmTRX Yield Monitor model:
- Yield Monitor Pro or Lite: The AG-HSK-1000 kit is all you need.
- Yield Monitor Plus+, Base, or 2.0: Order the AG-HSK-1000 kit and the AG-HS-1002 ECU Y-Split Harness. The kit will not connect to these models without the harness.
Not sure which yield monitor you have? Call 855-334-3400 before ordering and our team will confirm the right setup.
Frequently Asked Questions
What does the Head Height Sensor Kit do?
It measures combine header height in real time and sends that data to your FarmTRX Yield Monitor, improving area calculation and providing live cut-height feedback.
What combines can it be installed on?
It's a retrofit kit that can be installed on any combine.
Which yield monitors is it compatible with?
It connects directly to the FarmTRX Yield Monitor Pro and Lite. The Yield Monitor Plus+, Base, and 2.0 are also supported, but they require the AG-HS-1002 ECU Y-Split Harness, sold separately.
Do I need any additional parts?
Only if you have a Yield Monitor Plus+, Base, or 2.0. Those models need the AG-HS-1002 ECU Y-Split Harness to connect the sensor kit.
How does the sensor determine header height?
Two Inertial Measurement Units (IMUs), installed on the combine frame and feederhouse, determine sensor orientation relative to the ground.
Is this compatible with my setup?
Call 855-334-3400 if you're unsure whether it matches your combine or yield monitor.
Additional Information
- Part number: AG-HSK-1000
- Brand: FarmTRX
- Required for Yield Monitor Plus+, Base, and 2.0: AG-HS-1002 ECU Y-Split Harness (sold separately)
- Questions about fit or compatibility? Call 855-334-3400 to speak with our team.
Disclaimer
FarmTRX is the manufacturer of this product. Product specifications are provided by the manufacturer.
